Ethernet; Externalmanager; Gatekeeper - TANDBERG Gatekeeper User Manual

xconfiguration Authentication Mode: <On/Off>
Specifies whether or not to use H.235 authentication of calls and registrations. The default is Off: no
authentication is required.
16.2.2.

Ethernet

xconfiguration Ethernet Speed: <Auto/10half/10full/100half/100full>
Sets the speed of the Ethernet link. Use Auto to automatically configure the speed. The default is Auto.
You must restart the system for changes to take effect.
Note: to find out the current speed, use xstatus Ethernet Speed.
16.2.3.

ExternalManager

xconfiguration ExternalManager Address: <IPAddr>
Sets the IP address of the External Manager. The External Manager is the remote system, such as the
TANDBERG Management Suite (TMS), used to manage endpoints and network infrastructure.
xconfiguration ExternalManager Path: <path>
Sets the URL of the External Manager.
16.2.4.

Gatekeeper

Commands under the Gatekeeper node control aspects of the system's operation as an H.323
gatekeeper.
xconfiguration Gatekeeper Alternates Monitor: <On/Off>
Controls whether or not alternate gatekeepers are periodically interrogated to ensure that they are still
functioning. In order to prevent delays during call setup, non-functional alternates will not receive
Location Requests .
xconfiguration Gatekeeper Alternates Alternate [1..5] Address:
<IPAddress>
Sets the IP address of an alternate Gatekeeper. Up to 5 alternates may be configured. When the
Gatekeeper receives a Location Request, all alternates will also be queried.
xconfiguration Gatekeeper Alternates Alternate [1..5] Port: <Port>
Sets the IP port of an alternate Gatekeeper. The default is 1719.
xconfiguration Gatekeeper AutoDiscovery: <On/Off>
Specifies whether or not the Gatekeeper responds to gatekeeper discovery requests from endpoints.
The default is On.
xconfiguration Gatekeeper CallRouted: <On/Off>
Specifies whether the Gatekeeper should operate in call routed mode. The defaults is Off.
TANDBERG Gatekeeper User Guide
Page 73 of 105