Other Commands; About; Clear; Eventlog - TANDBERG Gatekeeper User Manual

16.6.

Other Commands

16.6.1.

about

Returns information about the software version installed on the system.
16.6.2.
clear <eventlog/history>
Clears the event log or history of all calls and registrations.
16.6.3.
eventlog <n/all>
Displays the event log. The event log contains information about past events which may be useful for
diagnostic purposes.
The number of lines (from end of event log) to display.
n
Displays the whole event log.
all
16.6.4.

license

Returns a list of the third party software licenses incorporated in the product.
license <index>
Returns the terms of the license with the specified index.
16.6.5.

relkey

Returns the release key with which this software has been installed.
16.6.6.
syslog <level> [IPAddress] [IPAddress]
Enables tracing to the console for the specified IP addresses.
level
IPAddress Optional parameters which specify up to 10 IP addresses to log information for. If no
Setting syslog 0 will turn off tracing.
about

clear

eventlog

license
relkey

Syslog

Specifies the detail at which to trace. Levels are 0-3; 3 gives most logging.
addresses are specified, activity to all IP addresses will be logged.
TANDBERG Gatekeeper User Guide
Page 93 of 105