Advertisement
The Extension terminal may be useful for the following situation.
If the Door Contact cannot be mounted on the door frame, you can connect an additional extension switch to the extension terminal to mount the
Door Contact remotely.
Any dry contact device with N.C. (Normal Close) loop can be connected to the Extension Terminal making the Door Contact serve as an Universal
Transmitter.
Multiple dry contact device can be wired together with Door Contact, as show in diagram below.
N
O
T
E
>
>
N
O
T
E
>
>
If both the Internal Magnet Switch and Extension Terminal operate together, then
When the protected door is opened/closed or the external device is triggered, the Door Contact activates and transmits a signal
immediately .
However, the Door contact will only transmit a Door Closed or Restored signal after both the door and the external device are restored for
3 sec.
10 SPECIFICATIONS
Model
Frequency
Power source
Battery life
Operating conditions
Weight
11 DIMENSIONS
32
GEN-DC
433.82 MHz
CR2 Lithium battery
Approx. 6 years (20 activations per day, 25°C)
-10°C to +45°C (up to 85% non-condensing)
50 g (including battery)
21
16.7
10.5
12
Unit: mm
Advertisement
