Revert To Current Configuration; Logical Address Configuration Editor; Device Settings; Logical Address - National Instruments MXI VXI-PCI8026 Getting Started

Revert to Current Configuration

Note You can successfully revert only if you have
Configuration option.

Logical Address Configuration Editor

© National Instruments Corporation
If you made changes to the configuration settings without committing those
changes (writing to configuration EEPROM), you can revert the
configuration settings to the values they had before you made the changes.
The options in the Logical Address Configuration Editor fall into three
categories—Device Settings, VXI Shared Memory, and Resource
Manager. The following paragraphs describe the options you can select for
each of the fields.

Device Settings

The Device Settings category contains the options to set the logical
address, device type, and address space of the PCI-MXI-2.

Logical Address

This parameter sets the MXI logical address of the PCI-MXI-2. The
following table shows the allowable range of values and the default value.
Logical Address Range
0 to 254

Device Type

This field indicates the classification of the PCI-MXI-2. The default value
is MBD, designating a message-based device. The following table shows
the available options.
Classification
Extended Device
Message-Based Device
Register-Based Device
Chapter 6
yet selected the Update Current
NOT
6-3
NI-VXI Configuration Utility
Default Value
0
Setting
EXT
MBD
RBD
VXI/VME-PCI8026 for Linux