Removing The Ni-Vxi Driver For Linux; Using The Ni-Vxi/Visa Software - National Instruments MXI VXI-PCI8026 Getting Started

Chapter 5 NI-VXI/VISA Software Installation
Note If you use
package you want to install.

Removing the NI-VXI Driver for Linux

Using the NI-VXI/VISA Software

VXI/VME-PCI8026 for Linux
rather than the
rpm
If you install the software to a location other than the default, set the
appropriate environment variable:
for NI-VISA. See your manual for details.
VXIPNPPATH
Please see the README file on the CD-ROM for additional important
information and instructions.
To uninstall the driver, you must meet the following requirements:
• You must have superuser privilege.
• The driver must not be in use.
Typing
rpm -e nivxi-pcimxi nivisa
software.
The NI-VXI software is configured to be loaded in the
/usr/local/nivxi
another directory, set the
directory. For example, if you have installed NI-VXI in
type the following command:
setenv NIVXIPATH /usr2/nivxi
The NI-VISA software is configured to be loaded in the
/usr/local/vxipnp
another directory, set the
directory. For example, if you have installed NI-VXI in
the following command:
setenv VXIPNPPATH /usr2/vpp
Place these lines in your
(Bourne or Korn shells) so they will execute automatically the next time
you log in.
script, you must repeat this step for each
INSTALL
NIVXIPATH
directory. If you have installed the software in
environment variable to your
NIVXIPATH
directory. If you have installed the software in
environment variable to your
VXIPNPPATH
or
.cshrc .login
5-2
for NI-VXI or
removes the NI-VXI/VISA
/usr2/nivxi
/usr2/vpp
(C shell) or
.profile
www.ni.com
,
, type