Figure 3-9. Mxibus Termination - National Instruments MXI VXI-PCI8026 Getting Started

Chapter 3 VXI-MXI-2 Configuration and Installation
VXI/VME-PCI8026 for Linux
Use switch 2 of U35 to select whether you want the VXI-MXI-2 to
automatically control termination of the MXIbus. Switch 1 of U35 lets
you manually control whether to terminate the MXIbus when automatic
termination is turned off. Switch 1 has no effect when switch 2 is set for
automatic MXIbus termination; you must turn off automatic termination if
you want to manually control termination.
Restore Factory Configuration
Change Factory Configuration
Automatic MXIbus Termination
a. Automatic MXIbus Termination (Default)
Restore Factory Configuration
Change Factory Configuration
Automatic MXIbus Termination
Restore Factory Configuration
Change Factory Configuration
Automatic MXIbus Termination
c. Do Not Terminate MXIbus (Off)
Terminate MXIbus
Terminate MXIbus
b. Terminate MXIbus (On)
Terminate MXIbus

Figure 3-9. MXIbus Termination

3-14
U35
No Yes
No Yes
Yes No
Yes No
U35
No Yes
No Yes
Yes No
Yes No
U35
No Yes
No Yes
Yes No
Yes No
www.ni.com