Onboard Dram; Eeprom Operation - National Instruments MXI VXI-PCI8026 Getting Started

Chapter 4 VME-MXI-2 Configuration and Installation
a. Boot from User Configuration (Factory Configuration Protected) (Default)
b. Boot from Factory Configuration (Factory Configuration Protected)
c. Boot from User Configuration (Factory Configuration Unprotected)
d. Boot from Factory Configuration (Factory Configuration Unprotected)

Onboard DRAM

VXI/VME-PCI8026 for Linux
1
OFF
1
OFF
1
OFF
1
OFF
The VME-MXI-2 can accommodate up to two 1.35 in. DRAM SIMMs.
Table 4-1 lists the SIMMs you can use. You can use 32-bit or 36-bit
SIMMs since DRAM parity is not required. Because the VME-MXI-2
supports only one organization at a time, all SIMMs installed must be of the
same type. Use Bank 0 first when installing SIMMs. This allows you to
install up to 64 MB. The VME-MXI-2 supports DRAM speeds of 80 ns
or faster.
2 3 4
2 3 4
2 3 4
2 3 4
Figure 4-5. EEPROM Operation
4-8 www.ni.com