Touchscreen Calibration; System Configuration; Display Settings - National Instruments TPC-2006 User Manual

Table of Contents

This chapter explains how to configure the TPC-2006.

Use the display settings to control the backlight brightness and screen

saver, which automatically turns off the screen when the TPC-2006 is not

in use for a designated time period.

Follow these steps to set the display properties:

Touchscreen Calibration

Follow these steps to calibrate the touchscreen:

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Select Start»Settings»Control Panel»Display to access the Display

Properties window.

To set the time to elapse before the backlight turns off, select the

Backlight tab, click the Automatically turn off backlight while on

external power checkbox and select the time from the drop-down

menu.

To set the LCD brightness, click the Advanced button to access the

Advanced Backlight Options window. Move the slider or click + or –

to adjust the LCD brightness and contrast. Click OK.

Select Start»Settings»Control Panel»Stylus to access the Stylus

Properties window.

There are two tabs in the Stylus Properties window: Double-Tap and

Calibration. Use Double-Tap to record the time period between two

taps when double-tapping in Windows CE. Use Calibration to calibrate

the touchscreen.

Click the Calibration tab and click Recalibrate to calibrate the

touchscreen. A cross appears on the screen in the following locations:

center, upper left, lower left, lower right, and upper right. Use the

stylus to tap the center of the cross until it moves to next location.

3-1

TPC-2006 User Manual

Table of Contents