Related Manuals for Black & Decker The Automatic Shut-Off 62784
Summary of Contents for Black & Decker The Automatic Shut-Off 62784
- Page 1 SAVE THIS USE AND CARE BOOK The Automatic Shut-Off ™ Iron by Black & Decker 1-800-231-9786 QUESTIONS? Please call us TOLL FREE MODEL 62784 Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.
-
Page 2: Important Safeguards
Be careful to avoid spilling water over iron when filling. I Do not operate iron with a damaged cord or plug or if the iron has been dropped or damaged. I To avoid the risk of electric shock, do not disassemble the iron;... - Page 3 SPECIAL INSTRUCTIONS I To avoid a circuit overload, do not operate another high-wattage appli- ance on the same circuit. I If an extension cord is necessary, a 10-ampere rated cord with a polar- ized plug and Underwriters Laboratories listing should be used. Cords rated for less amperage may overheat.
- Page 4 Full-Length Button Grooves **SurgeClean Heat Setting Guide *SilverStone ® Non-Stick Soleplate Water Full Mark Water Refill Mark Large Water Windows *SilverStone ® is a trademark of E.I. DuPont de Nemours & Co. **SurgeClean™ is a trademark of The Black & Decker Corp. Water Fill Hole Pivoting Cord Cord Wrap/...
- Page 5 2. Fill the Water Tank about 1/3 full with water (approx- imately 2 oz.). (See “Filling With Water,” page 6) 3. Plug the iron into a standard 120V (polarized) electri- cal outlet. 4. Set the TEMPERATURE SELECTOR DIAL to the Cotton or Linen settings (6 or 7).
- Page 6 If using distilled or demineral- ized water, tap water should be used the first time you use the iron and once per month thereafter to main- tain steam performance. 3. When filling with water, be sure...
- Page 7 INDICATOR MARK. Pump the SPRAY Button a few times to get a mist. Surge of Steam 1. Be sure the iron is filled with water before using the SURGE feature. 2. Move the TEMPERATURE SELEC- TOR DIAL to a setting within the...
- Page 8 SHUT-OFF After the iron has been on for 55 minutes, the power light will begin to blink. It will continue to blink for 5 minutes to alert you that the iron is getting ready to shut off.
- Page 9 2. Turn the TEMPERATURE SELECTOR DIAL to Off. 3. Unplug the iron. 4. Allow the iron to cool, wrap the cord, and clip it in place using the cord clip on the plug. 5. It is not necessary to empty the water if the iron is used frequently.
-
Page 10: Troubleshooting
CLEANING THE OUTSIDE SURFACES Need Help? 1. Is the iron plugged in and the green Power Light on? IRON Press the PUSH ON Button. WON’T HEAT? 2. If the Light is not on, will a lamp plugged into the out- let turn on? 3. -
Page 11: Fabric Ironing Chart
ADJUSTABLE STEAM/DRY DIAL set at the corre- sponding , or 1. Has the iron been on for an hour? Press the PUSH ON Button to restart the iron and the green light will come on. You will have another hour to iron before the unit shuts off automatically. - Page 12 FULL THREE-YEAR WARRANTY ON SEARS KENMORE SMALL APPLIANCES For three years from the date of purchase, Sears will replace this electric appliance, free of charge, if defective in material or workmanship. TO OBTAIN REPLACEMENT UNDER THIS WARRANTY, SIMPLY RETURN THE SMALL APPLIANCE TO THE NEAREST SEARS STORE IN THE UNITED STATES.
Need help?
Do you have a question about the The Automatic Shut-Off 62784 and is the answer not in the manual?
Questions and answers