How To Use; Preparing The Iron - Black & Decker The Automatic Shut-Off 62784 Use And Care Book Manual

How To Use

PREPARING
THE IRON
IMPORTANT: Follow this procedure to clean the iron
before first use and to become familiar with its
features.
1. Remove any labels, stickers, or tags which may be
attached to the body or soleplate of the iron.
2. Fill the Water Tank about 1/3 full with water (approx-
imately 2 oz.). (See "Filling With Water," page 6)
3. Plug the iron into a standard 120V (polarized) electri-
cal outlet.
4. Set the TEMPERATURE SELECTOR DIAL to the
Cotton or Linen settings (6 or 7). Press the PUSH ON
Button and the light will come on. Preheat for about 2
minutes. (See "Starting The Iron," page 6)
5. While ironing on an old cotton terry cloth towel for
about two minutes, try using each of the iron's fea-
tures being careful to avoid placing hands or face near
the steam vents:
SPRAY: Turn the SPRAY/SURGE Button so that the
Spray faces the INDICATOR MARK. Pump the SPRAY
Button a few times to see the amount of water that is
released.
SURGE OF STEAM: Turn the SPRAY/SURGE Button so
that the Surge faces the INDICATOR MARK. Pump the
SURGE Button a few times to see the blast of steam
that comes out. This will also activate the
SurgeClean™ feature that will help clean the steam
vents.
STEAM SETTINGS: Turn the ADJUSTABLE STEAM/DRY
DIAL to the INDICATOR MARK for
um), and
with the different amounts of steam at each setting.
(heavy) settings to become familiar
5
(light), (medi-