Dry Ironing; Using Moisture; Spray; Surge Of Steam - Black & Decker The Automatic Shut-Off 62784 Use And Care Book Manual

INDICATOR
MARK
Figure C — Dry

USING MOISTURE

INDICATOR
MARK
Figure D — Spray
INDICATOR
MARK
Figure E — Surge
4. Turn the TEMPERATURE SELEC-
TOR DIAL to the appropriate setting
and allow to preheat for approxi-
mately 45 seconds.
NOTE: The iron will automatically
shut off after one hour. (see
"Automatic Shut-Off" page 8)

Dry Ironing

Turn the ADJUSTABLE STEAM/DRY
DIAL to the INDICATOR MARK for
Dry to iron without steam. (Figure C)

Spray

1. Be sure the iron is filled with
water before operating the SPRAY
feature.
2. Move the TEMPERATURE SELEC-
TOR DIAL to the appropriate setting.
3. Turn the SPRAY/SURGE Button so
that the Spray (Figure D) faces the
INDICATOR MARK. Pump the
SPRAY Button a few times to get
a mist.

Surge of Steam

1. Be sure the iron is filled with water
before using the SURGE feature.
2. Move the TEMPERATURE SELEC-
TOR DIAL to a setting within the
steam band (choose one of the
settings 4 thru 7 for the appropriate
fabric).
3. Turn the SPRAY/SURGE Button so
that the Surge (Figure E) faces the
INDICATOR MARK. Pump the
SURGE Button for a concentrated
blast of steam.
7