SAVE THIS USE AND CARE BOOK LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO Advanced System Irons / Planchas Models F505S, F550S, F605S, F612, F650S POLARIZED PLUG (North and Central American Models Only) This appliance has a polarized plug (one blade is wider than the other).
2. Fill the Water Tank about 1/3 full with water. (See “Filling With Water.”) 3. Plug the iron into a standard electrical outlet. 4. Set the Temperature Selector Dial to the Cotton or Linen settings (6 or 7) and preheat for about 2 minutes.
1. Plug in the iron and push the ON Button (B). 2. Use the Heat Fabric Guide on the body of the iron to help you select the setting for the fabric to be ironed (such as Nylon, Cotton, etc.).
The iron will automatically shut off after one hour. To continue ironing, push the “On” button. For Model F650S: This model is designed to shut off if the iron hasn’t been moved for 10 minutes. The Green Temperature Ready Light will blink as a warning before the iron shuts itself off.
SURGE, depending on your model) and rapidly pump the iron 5-6 times over an old cloth to clean residue form the soleplate. For Models with Self Clean (F505S & F650S): Use this feature about once a month to flush minerals and lint from the iron to help avoid scorching or brown spotting.
4. Sit the iron on its Heel Rest, plug it in, and let it preheat for about 2 min- utes. Iron over an old cloth, then unplug and let the iron cool. CLEANING THE OUTSIDE SURFACES 1. Allow the iron to cool completely.
Iron continu- ously over an all cotton cloth for about 5 minutes. Place the iron on its heel rest and leave it operating for 7-8 minutes. These steps will help dry the inside of the iron.
I For models with Self Clean, do not press the Self Clean button while ironing. I Do not operate iron with a damaged cord or plug or if the iron has been dropped or damaged. ESPAÑOL INSTRUCCIONES DE SEGURIDAD Cuando se usan aparatos electrónicos, deben tomarse algunas...
Do not leave iron unattended while connected or on an ironing board. Always position iron carefully to prevent it from falling if ironing board is accidentally moved or cord is pulled. Always use Heel Rest.
SPECIAL INSTRUCTIONS I To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit. I If an extension cord is necessary, a 10-ampere rated cord with a polarized plug and Underwriter’s Laboratories (UL)-listing should be used. Cords rated for less amperage may overheat.
F650S Shown / Ilustrada 1. Water Fill Hole 2. Spray Nozzle 3. Temperature Selector Dial 4. Adjustable Steam/Dry Dial 5. Spray Button 6. Push ON/OFF Button and Power On Light (Model F650S: Ready/Wait Lights; Model 550S: Thermostat Cycle Light) 7. Pivoting Cord 1.
FULL TWO-YEAR WARRANTY Black & Decker Inc. warrants this product against any defects that are due to faulty material or workmanship for a two-year period after the original date of consumer purchase or receipt as a gift. This warranty does not include damage to the product resulting from accident or misuse.