NOTE: USE THE SPRAY FEATURE AT ANY TEMPERATURE SETTING STEAM AND SURGE OF
STEAM SHOULD ONLY BE USED IN THE STEAM AREA OF THE TEMPERATURE SELECTOR DIAL
(Settings 4 thru 7). WATER SPOTTING MAY OCCUR IF THE SETTING IS TOO LOW.
3. If steaming doesn't start, gently tap the Soleplate
on the ironing board once or twice.
1. Is the TEMPERATURE SELECTOR DIAL set in a
steam area (setting 4 thru 7) and is the
ADJUSTABLE STEAM/DRY DIAL set at the corre-
1. Has the iron been on for an hour? Press the
PUSH ON Button to restart the iron and the green
light will come on. You will have another hour to
iron before the unit shuts off automatically.
NOTE: You may press the PUSH ON Button at any
time during ironing to extend your "On" time for an
Refer to this chart for recommended Temperature
and Steam Settings and ironing instructions for var-
ious fabrics. Always read garment labels and follow
manufacturer's ironing instructions.
Dry iron on wrong side. Press
washables while damp.
Dry iron on wrong side to prevent
shine. Press washables while
Dry iron washables while fabric
is damp. Iron rayon fabrics on the
wrong side. Steam iron if fabric
Check care label and follow the
manufacturer's instructions for
blends: use the setting for the
fiber requiring the lowest heat.
Steam iron on wrong side to pre-
vent shine, or use a press cloth on
right side. Do not press complete-
Dry iron washables while damp.
Use steam as needed. Iron dark
fabrics on wrong side to avoid
Dry iron washables while damp
and until dry. Use steam as need-
ed. Iron dark linens on wrong side
to avoid shine.