Smtk Installation; Installing The Standard Development Toolkit; Installing The Smtk Environment - Siemens TC45 User Manual

TC45 TC45 JAVA User's Guide
Confidential / Released

2.3 SMTK installation

The SMTK comes with an installation CD. The installation program provided automatically
installs the necessary interfaces and emulators. Software can be uninstalled and updated
with the install program. The next sections cover the installation and removal of the SMTK
and the installation of the SDK, Sun ONE Studio or Borland JBuilder.

2.3.1 Installing the Standard Development Toolkit

1. The JDK version 1.4.1_02 is provided on the TC45 SMTK installation disk in the
subdirectory "JDK 1.4.1". To begin the installation, start the j2sdk-1_4_1_02-windows-
i586.exe and follow the instructions of the JDK setup procedure.
2. Once the toolkit has been installed, the environment variable "path" can be altered to
comfortably use the JDK tools.
3. Open the Control Panel.
a) Open System.
b) Click on Advanced.
c) Click on the Environment Variables button.
d) Choose path from the list of system variables.
e) Append the path for the bin directory of the newly installed SDK to the list of
directories for the path variable

2.3.2 Installing the SMTK environment

1. Insert CD, start setup.exe. If the dialog box appears simply press the "Next" button to
continue the procedure.
2. You will be asked to read the license agreement. If you accept the agreement, press
"Next" to continue with the installation.
3. A file including special information about the installation and use of the SMTK is shown.
Press "Next" to continue.
4. The installation software checks for the SDK. If there is no SDK on the system the
installation procedure will not continue. Please follow the instructions in Section 2.3.1
above for installing the SDK.
5. At this point, the installation software checks for a Java IDE to be integrated with the
SMTK. A Java IDE is not necessary to use the TC45 SMTK. The IDE installation can be
done at any time even if the TC45 SMTK is installed already. To install the Java IDE run
the setup program in maintenance mode again. However, you can continue the setup
procedure and install the IDE installation later or cancel the setup program at this stage
and restart it after installing one of the supported Java IDEs. In case you wish to install a
Java IDE please follow the instructions in Section 2.3.3 for installing Sun ONE Studio
Mobile Edition, Section 2.3.4 for installing Borland JBuilder Enterprise Mobile Set 3 or
Section 2.3.4.2 for installing Borland JBuilder Personal Mobile Set 3.
6. If the SDK and one or more Java IDE's are found, you will be asked to choose which IDE
you want integrated into the TC45 development environment. Once an IDE has been
found and selected, press next to continue. Ensure that your Java IDE is closed.
7. Select the folder where the TC45 SMTK will be installed. A folder will be suggested to
you but you may browse to select a different one.
8. Choose the path that TC45 will appear under in the Start Menu.
9. A brief summary of all entries made shows up.
10. After step 9, all necessary files will be copied from the CD into the target folder.
TC45_JAVA User's Guide_V02 Page 14 of 72 30.06.2003