Mounting - Siemens SCALANCE W788C-2 Series Operating Instructions Manual

Industrial wireless lan, simatic net
Hide thumbs Also See for SCALANCE W788C-2 Series:
Table of Contents

Advertisement

Mounting

Minimum distance to antennas
Fit the device so that there is a minimum clearance of 20 cm between antennas and
persons.
If a device is operated in an ambient temperature of more than 50 °C, the temperature of
the device housing may be higher than 70 °C. The device must therefore be installed so
that it is only accessible to service personnel or users that are aware of the reason for
restricted access and the required safety measures at an ambient temperature higher than
50 °C.
When used in hazardous environments corresponding to Class I, Division 2 or Class I,
Zone 2, the device must be installed in a cabinet or a suitable enclosure.
General notes on use according to ATEX and IECEx
To comply with EC Directive 2014/34/EU (ATEX 114) or the conditions of IECEx, this
enclosure or cabinet must meet the requirements of at least IP54 in compliance with EN
60529.
SCALANCE W788C-2
Operating Instructions, 01/2017, A5E03692120-11
CAUTION
WARNING
WARNING
WARNING
4
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalance w788c-2 rj45Scalance w788c-2 m12Scalance w788c-2 m12 eec

Table of Contents