Symphonic CHSP80G Owner's Manual page 90

Symptom
E
D
Titles can not be edited or deleted.
I
T
I
N
G
Symptom
R
No operation by remote control
E
M
O
T
E
C
O
N
T
R
O
L
Pressing SET UP does not do anything.
Symptom
O
The Clock display does not appear
T
in the Front Panel Display.
H
E
When you forget the password
R
for Parental Lock.
S
* If you are still having trouble with this unit after checking 'Troubleshooting', write down the error code and the error
description, and call our helpline mentioned on the front page to locate an Authorized Service Center.
90 EN
Others
Troubleshooting (Cont'd)
Solution
• The titles itself may be protected. Cancel the protection by
following the steps on page 48.
Solution
• Check if the batteries are weak or inserted incorrectly.
Replace weak batteries and insert with their polarities
(+/ - signs) as indicated.
• Aim the remote control at the remote sensor and operate
within 23 feet (7 m) of the unit.
• Remove all obstacles to clear the path of the infrared signal.
• Refer to the infrared signal. (See page 13.)
• Select the correct mode to operate by pressing DVR or DVD.
• The operable range from the unit is 10 feet (3m) within 15˚.
• While the Programmed Recordings Screen, or the Title List is
displayed or while the disc is loading, SET UP does not
respond.
Solution
• Check that the AC power cord is connected securely.
• (In case of power failure) Check the breaker and Clock Setting.
• Please cancel the password and the set level. (See pages 83-84.)