Manual Clock Setting - Symphonic CHSP80G Owner's Manual

5
If you do not know the PBS channel number
in your area :
Using / , select "Auto". Press ENTER.
Your setting is now activated.
If you know the PBS channel number
in your area :
Using / , select "Manual". Press ENTER.
Input window will appear.
Set Channel No Set Channel No.
CH 1 CH 1
Using the Number Buttons or
PBS channel number. Press ENTER.
Your setting is now activated.
If you want to set the clock manually and to
cancel the Auto Clock Setting :
Using / , select "Off ". Press ENTER.
The Auto Clock Setting will be canceled.
• The default setting is "Auto".
6
Press SET UP to exit.
7
Press POWER to turn off the unit.
This unit will search for the clock time only when
the power is off. Leave it off for several minutes to
give the unit a time to set the clock.
Note
• The clock may set itself automatically after you
connect the antenna / cable signal to this unit and
plug in the power cord. In this case, the current time
will appear on the Front Panel Display.
• If the current time is not displayed or the displayed
clock time is not correct, set the clock manually.
DVR (Initial Setups)
Clock Setting (Cont'd)

Manual Clock Setting

1
2
/ , enter the
3
4
5
6
7
Note
• Your clock setting will be lost if either there is a
power failure or this unit has been unplugged for
more than 30 seconds.
Press SET UP.
"Easy Setting Menu" or "Advanced Menu" will appear.
Advanced Menu
Erase All in DVR
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
Using / , select "Initial Setup". Press ENTER.
Advanced Menu
OSD Language
DVR Menu
Clock Setting
Initial Setup
Channel Setting
Playback
Timer Program
Record
Easy Setting Menu
Reset to factory default
Using / , select "Clock Setting".
Press ENTER.
Clock Setting Menu will appear.
Cloc Clock Setting k Setting
Clock Setting Cloc k Setting
Auto Cloc uto Clock Setting k Setting
Daylight Sa Da ylight Saving Time Time
Using / , select "Clock Setting".
Press ENTER.
Clock Setting Window will appear.
Clock Setting Cloc k Setting
JAN AN / 1 / 2006 2006 (Sun) (Sun)
Using / , move to the item you want to set and
using / , change the setting the current date and
time.
When all the information is entered, press ENTER.
Your setting is now activated.
Although seconds are not displayed, they will be
counted from zero.
Press SET UP to exit.
-- : -- AM
EN 23