Others; Troubleshooting - Symphonic CHSP80G Owner's Manual

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some
simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.
General Operation
Error message
Error
Timer program starts soon.
Discs
Error message
Disc Error
--Please eject the disc.--
Playback feature may not
be available on this disc.
Region Error
--Please eject the disc.--
Playback is not authorized
in your region.
Timer Recording / Recording & Navigator
Error message
Error
Prohibited timer program.
Error
Cannot register timer program.
Playback / Editing
Error message
Parental Lock On
The current selected parental level
prohibits playback.
86 EN

Others

Troubleshooting

Cause & Solution
• The operation is not available.
• The operation is not available since a Timer Recording will start soon.
Cause & Solution
• Invalid disc is inserted. Please insert a disc supported by this unit.
(See page 56.)
• A disc with the invalid region code is inserted.
This unit only supports the discs with region code 1 or ALL.
Cause & Solution
• The entry for the Timer Recording is invalid. The recording duration must
be in 24 hour period. The end time must be later than the present time,
and the start time must be before 1-1-2055. Re-program the Timer
Recording correctly. (See pages 28-31.)
• The maximum number of timer programs is exceeded.
Delete unnecessary timer programs. (See
Cause & Solution
• The current Parental Lock setting prohibits the playback.
Change the Parental Level. (See page 83-84.)
pages 28-31.)