Display Setting - Symphonic CHSP80G Owner's Manual

DVD SETUP (Cont'd)
TIMER
POWER PROG. OPEN/CLOSE
SET UP SET UP
1 2 3
CHANNEL
4 5 6
PROGRAM
RECORDINGS
7 8 9
CLEAR +10 MODE
0
ZOOM SUB TITLE ANGLE AUDIO
MENU TOP MENU
ENTER ENTER
DISPLAY RETURN
SKIP DVR DVD DVD SKIP
REV PLAY FWD
REC/OTR STOP PAUSE
SEARCH REPEAT A-B
DVD (Setups)
B

DISPLAY Setting

You can change the display functions. Follow steps 1 to
3 in the "CUSTOM Menu" section on page 79.
4
Using
DISPLAY items will appear.
5
Using
Press ENTER.
TV ASPECT:
TV ASPECT
STILL MODE
• Select "4:3 LETTER BOX", so that black bars may
appear on the top and bottom of the screen.
• Select "4:3 PAN & SCAN" for a full height picture
with both sides adjusted.
• Select "16:9 WIDE" if a wide-screen TV is
connected to this unit.
STILL MODE: (Default: AUTO)
TV ASPECT
STILL MODE
• Select "AUTO" usually.
• If you select AUTO, automatically select the best
resolution setting (FRAME or FIELD) based on the
data characteristics of the pictures. (default)
• If you select "FIELD", the picture in the still mode
will be stabilized.
• If you select "FRAME", the picture in the still mode
will be highly defined.
• An individual picture on TV screen is called a
"frame", which consists of two separate images
called a "field".
• Some pictures may be blurred at if you select
"AUTO" in the still mode due to their data
characteristics.
6
To exit the menu, press SET UP.
/ , select a desired item. Press ENTER.
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
ENTER
/ , select a desired setting.
(Default: 4:3 LETTER BOX)
QUICK
TV ASPECT
4:3 LETTERBOX
4:3 LETTER BOX
AUTO
4:3 PAN & SCAN
16:9 WIDE
STILL MODE
4:3 LETTERBOX
AUTO
AUTO
FIELD
FRAME
EN 81