Tv Aspect; Audio Out - Symphonic CHSP80G Owner's Manual

TV Aspect

You can select the TV aspect ratio to match the formats of
what you are playing back on the unit and your TV screen
(4:3 standard or 16:9 widescreen TV).
(Follow steps 1 to 4 on page 52.)
Using / , select "TV Aspect".
Press ENTER.
Menu window will appear.
4:3 Letter Box 4:3 Letter Bo
4:3 Pan & Scan
• Using / , select a desired setting.
Press ENTER.
Your setting is now activated.
4:3 Letter Box:
For full-length picture with black bars on
the top and bottom of the screen
4:3 Pan & Scan:
For a full-height picture with both sides
trimmed
16:9 Wide:
For a widescreen TV
DVR (Other Setups)
Playback Setting (Cont'd)
TV Aspect TV Aspect
an & Scan
16:9 Wide Wide

Audio Out

You can set the digital audio output.
(Follow steps 1 to 4 on page 52.)
Using / , select "Audio Out".
Press ENTER.
Menu window will appear.
Dolby Digital Dolby Digital
• Using / , select a desired item to set.
Press ENTER.
Menu or Option window will appear.
Referring to the explanations below, set the selected item.
Dolby Digital (Default: Stream)
Dolby Digital Dolby Digital Dolb Dolby Digital
PCM PCM
• Using / , select a desired setting.
Press ENTER.
Your setting is now activated.
PCM: Convert the Dolby Digital into "PCM"
(2 channel).
When your amplifier / decoder is NOT
compatible with Dolby Digital, set to PCM.
Stream: Outputs Dolby Digital signals.
When your amplifier / decoder is
compatible with Dolby Digital, set to
"Stream".
Note
• If the audio on DVR is recorded in Dolby Digital
format, set Dolby Digital to PCM so that you can
switch to main audio (L), sub audio (R), or a mix of
both (L / R) with your amplifier / decoder.
Audio Out Audio Out
y Digital
Stream Stream
EN 53