Symphonic CHSP80G Owner's Manual page 87

Symptom
The power does not turn on.
The unit turns on automatically without
P any operation.
O
The OSD Language Setting Menu appears
W
every time the power turns on.
E
R
The power turns off automatically .
Symptom
The unit does not function.
No picture, sound or menu appears on
G
the screen.
E
N
E
R
No picture or menu appears on the
A
screen in the DVR mode.
L
Clock Setting and Channel Setting cannot
be performed.
The unit does not operate properly.
Others
Troubleshooting (Cont'd)
Solution
• Check that the AC power cord is connected securely.
• Batteries of the remote control are weak.
• The unit turns on automatically 3 minutes before the Timer
Recording.
• Finish up the Language Setting procedure by selecting a
language in the OSD Language Setting Menu. Press ENTER to
activate the setting.
• The power turns off automatically when abnormality is
detected on the disc. Press POWER or OPEN / CLOSE A
to open the disc tray, and before it is opened completely, press
the button again. Then take out the disc.
• The power turns off automatically when an OTR is completed.
Solution
• or error message appears if the operation is prohibited.
• Batteries of the remote control are weak or exhausted
• Check if the connections are made securely and correctly.
• Check if the cables are not damaged.
• Check if a correct external input channel is selected on your
TV. (See page 17.)
• Check if you have completed the Channel Setting.
• COMPONENT VIDEO OUT connection is not available in the
DVR mode. Use other connection such as VIDEO OUT or
S-VIDEO OUT.
• If a Timer Recording is in standby or if a recording is in
progress, these operations cannot be performed. Delete timer
programs or stop the recording.
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on until the moisture evaporates.
(See page 4.)
EN 87