Adding / Deleting Channels - Symphonic CHSP80G Owner's Manual

Adding / Deleting Channels

The channels you no longer receive or seldom watch can be
deleted from the memory. You can also add channels
manually into the memory.
1
Press SET UP.
"Easy Setting Menu" or "Advanced Menu" will appear.
Advanced Menu
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
2
Using / , select "Initial Setup".
Press ENTER.
Advanced Menu
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
3
Using / , select "Channel Setting".
Press ENTER.
Channel Setting Menu will appear.
4
Using / , select "Manual Preset".
Press ENTER.
Option window will appear.
5
Using / , select the channel number to add or
delete.
• Use / or CHANNEL
channels one by one, or use the Number Buttons
to select the channel directly.
DVR (Initial Setups)
Channel Setting (Cont'd)
Erase All in DVR
OSD Language
Clock Setting
Channel Setting
Playback
Record
Reset to factory default
Channel Setting Channel Setting
Auto Preset uto Preset
Manual Preset Man ual Preset
TV A TV Audio Select udio Select
CH 1 CH 1
Add Add
Delete Delete
/ to change the
6
Using / , select "Add" or "Delete".
Press ENTER.
The channel number will be added or deleted from
the channel memory. Then, the next channel
number will appear so that you can continue adding
or deleting channels.
7
Press SET UP to exit.
Note
• External input channels ("L1") cannot be skipped.
• You cannot change the channel while the unit (DVR)
is in the basic recording, OTR or Timer Recording
mode.
CH 1 CH 1
Add Add
Delete Delete
EN 21