On-Screen Display For Dvr Mode - Symphonic CHSP80G Owner's Manual

On-Screen Display for DVR Mode

General Information:
Press DVR first.
In stop mode, press DISPLAY once to show the general
information.
DVR MODE
*
1
Resume
*
DVR
2
20:56
Each section includes the information as listed below:
1 Resume Playback status
2 Recording status
• Recording channel number
• Remained time of the DVR
3 Current audio status
4 Current channel number
These information will appear during playback or
*
when the resume playback point is memorized.
Display Menu:
During playback in DVR mode, press DISPLAY once to
show the information on the current operation status.
Press DISPLAY one more time to show the icons for the
available features.
DVR MODE
DVR Play
1
Press DISPLAY.
DVR MODE
4
?
NR
SEARCH
Each section includes the information as listed below:
1
Playback status icon
2
• Current title number / total number of the titles
• Current chapter number / total number of the chapters
• Elapsed playback time of the current title / total
time of the title
3
• Playback status
• Name of the current title
4 Icons for the available features:
: Search
: Audio
: Repeat
: Noise Reduction
14 EN
Before You Start
Functional Overview (Cont'd)
3
T 1 / 1 C 1 / 1 0:00:04 CH 12 M
4
CH 12
2
T 8 / 8 C 1 / 4 0:00:04/ 1:30:00
3
FEB/ 2 8:53 CH12
T 8 / 8 C 1 / 4 0:00:04/ 1:30:00
Setup Menu:
Press DVR first.
Press SET UP to display "Easy Setting Menu" or
"Advanced Menu". Choose either menu using
then press ENTER.
("Easy Setting Menu" consists of those frequently needed.
You can make all required settings using "Advanced Menu".)
Example : Advanced Menu
Advanced Menu
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
Using / , select a menu, then press ENTER.
Advanced Menu
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
Using / , select an Item to set, then press ENTER.
Sub menu or option window will appear.
Advanced Menu
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
Using / / / , make your desirable selection, then
press ENTER.
Note
• This is an example screen only for explanation.
Displayed items varies depending on the actual mode.
• The information will not appear, when there is no title
recorded in the DVR.
• Closed Caption and V-Chip will not be displayed while
the Display Information is shown on the screen.
• The Setup Menu in DVR mode will automatically
disappear without any operation during 5 minutes.
Erase All in DVR
OSD Language
Clock Setting
Channel Setting
Playback
Record
Reset to factory default
OSD Language
Clock Setting
OSD Language OSD Language
Channel Setting
English English
Fraçais ais
Playback
Espa Español ol
Record
Reset to factory default
/ ,