One Touch Recording (Otr) - Symphonic CHSP80G Owner's Manual

DVR DVR DVR
This is a simple way to set the recording time in blocks of
30 minutes.
Press DVR first.
Preparing for OTR:
• Check that the DVR has enough recordable space for
the time you set.
1
Turn on the TV. Select the appropriate external input
channel. (See page 17.)
2
Using CHANNEL
Buttons, select a desired channel to record.
3
Press REC / OTR.
Recording will start.
I
DVR Rec
20:56
4
Press REC / OTR repeatedly to change the recording
time.
I
DVR Rec
20:56
0:30
(Normal Recording)
8:00
The recording time will be extended by 30 minutes
every time you press REC / OTR.
• The maximum recording time is 8 hours.
• With OTR, the recording time that exceeds the
remaining time will not be displayed.
• To change the recording time during the
One Touch Recording, Press REC / OTR
repeatedly.
DVR (Recording)

One Touch Recording (OTR)

/ or the Number
0:06:50 CH8
0:06:50 CH8
OTR (0:30)
1:00
7:30
5
When OTR ends, the unit will turn off automatically
except under conditions listed below.
- If a Timer Recording is programmed to start in 5
minutes.
- During playback of DVR.
- While displaying menus or information on the
screen.
- When DVD mode is selected.
• To cancel the OTR in progress, press STOP C.
Note
• The remaining recording time will be displayed on the
Front Panel Display during a One Touch Recording.
Press DISPLAY to see it on the TV screen.
• You cannot pause a One Touch Recording.
• When a power failure occurs, the unit will turn off
automatically in DVR mode.
EN 27