Hints For Timer Recording - Symphonic CHSP80G Owner's Manual

To delete a program from the list:
1. Using / , select "Delete", then press
ENTER.
Confirmation window will appear.
Delete this Delete this Timer Prog Timer Program?
Yes
You can access this screen by pressing CLEAR
instead of ENTER at step 2.
2. Using / , select "Yes" if you want to delete
the title.
Then, press ENTER.
4
PressTIMER PROG. to exit.
Note
• As to the timer program in progress (which is shown
in red in the Timer Programming List), you only can
edit the end time.The changes made during recording
will be recognized as only specific to that recording
in progress and it will not affect the daily or the
Weekly Recording Setting.
DVR (Recording)
Timer Recording (Cont'd)
am?
No

Hints for Timer Recording

The priority of overlapped settings
When the timer programmings are overlapped, you will
receive a warning message.
If this happens, check the timer programming and change the
programming as necessary. Otherwise, the unit will prioritize
recording as described below.
Same start time and different end time:
The program set first has the priority.
PROG. 1
PROG. 2
Actual
PROG. 1
recording
The first 15 seconds (at the longest) will be cut off.
Different start time and different end time:
A program with the earlier start time has the priority.
PROG. 1
PROG. 2
PROG. 3
PROG. 3
PROG. 2
Actual
PROG. 1
recording
The first 15 seconds (at the longest) will be cut off.
Recording time is entirely overlapped:
PROG. 2 will not be recorded.
PROG. 1
PROG. 2
Actual
PROG. 1
recording
End time of Program 1 is the same as the
start time of Program 2:
PROG. 1
PROG. 2
Actual
PROG. 1
recording
The last 30 seconds (at the longest) will be cut off.
PROG. 2
PROG. 2
EN 31