Programming A Recording With The Recording & Playback Navigator; To Change Or Cancel The Program; Playback And Edit With Programmed Recordings - Symphonic CHSP80G Owner's Manual

Recording & Playback Navigator (Cont'd)
Programming a Recording with
the Recording & Playback
Navigator
1
Press PROGRAM RECORDINGS.
The Programmed Recordings Screen will appear.
2
Using / / / , select the desired cell.
• For example, to record from 4:00 pm in two days
from the present day, choose the cell as follows.
ordings Scheduled Recordings
THU FRI TODAY SUN MON TUE WED THU FRI
PM
3
4
5
Present day
Tomorrow
There are two ways to program a recording.
1) Direct Program---Press CHANNEL
the Number Buttons to select a channel. Press
ENTER.The cell turns pink indicating that the
timer programming is now set in that cell.
Press PROGRAM RECORDINGS to exit.
2) Detailed Program---Press ENTER
"New Program" will appear.With "New
Program" selected, press ENTER again.
Timer Programming Window will appear.
Date Start Time
3 9 00
FEB /
Fri : AM
Enter the necessary information by following the
instructions described in 'Timer Recording' on pages
28-31.
To Change or Cancel the
Program
1
Repeat steps 1-2 above.
2
Press ENTER to call up the menu window.
Program Change Prog
Timer Program Timer Prog
New Prog Ne
DVR (Recording)
SAT
Cell
Day after tomorrow
/ or
End Time CH
8
10 : 00 AM
DVR 29:06
am Change
am
w Program am
3
To change the program
Using / , select "Program Change", then
press ENTER.
Timer Programming Window will appear.
Correct the information, then press ENTER.
To cancel the program
Using / , select "Timer Program", then
press ENTER.
Timer Programming List will appear.
Press CLEAR .
Confirmation window will appear. Select "Yes",
using / and press ENTER.
To program a new Timer Recording
Using / , select "New Program", then
press ENTER.
4
Press TIMER PROG. to exit.
Playback and Edit with
Programmed Recordings
1
Press PROGRAM RECORDINGS.
The Programmed Recordings Screen will appear.
2
Using / / / , select the recorded program.
The recorded program plays back in the preview
window.
3
Press ENTER to call up the menu window.
Pla Play F y From Star
Resume Pla Resume Play
Previous Recordings Pre vious Recordings
4
Using / , select "Play From Start".
Press ENTER.
The recorded program is played back.
If you want to resume playback from the last
viewed point:
Select "Resume Play".
Refer to 'Resume Playback' on page 37.
To display a Title List:
Select "Previous Recordings".
Refer to 'Playback from the Title List' on page 37.
rom Start
EN 33