Maintenance; Setup And Testing - OPTICOM 764 Installation Manual

Intersection Equipment Installation Instructions

16 Maintenance

Opticom™ GPS System components are designed for reliable operation. Inspect the components at regular
intervals to ensure proper system operation.
GTT recommends the following:
•
All components should be inspected at least every twelve months.
•
Verify that radios are broadcasting using the On-site software.
•
Each intersection and vehicle system should be inspected and tested at least every twelve months to
ensure that it functions to your specifications and requirements.
•
Intersection systems should be tested with known good vehicle systems.
•
Vehicle systems should be tested with known good intersection systems.
•
You should develop a test plan that fits your department's operations and meets the needs of your
system.
•
You should keep accurate and up-to-date records of system performance and test results.

17 Setup and Testing

1. If you are operating in GPS mode or simultaneous GPS/IR mode you will need to set-up and map the
phase selector before it will be operational.
2. It is recommended that a GTT trained technician or a GTT dealer perform the set-up and mapping.
63