Checkout; Troubleshooting; Fuse Locations - OPTICOM 764 Installation Manual

Gps system phase selector
Table of Contents

Advertisement

Intersection Equipment Installation Instructions

14 Checkout

For details on how to check out and test the Opticom™ GPS System, refer to the On-site software Help files.
NOTE: When operating in GPS mode or GPS/IR mode the GPS Intersection equipment will not operate
until setup and mapping procedures are completed. Refer to the On-site software help files for details on
how to set up and map the intersection equipment.

15 Troubleshooting

This section provides details on troubleshooting the equipment.

15.1 Fuse Locations

There are two fuses on the phase selector. They are approximately .25"in diameter, brown in color and
removable from their sockets.
These fuses are both 1 amp. The part number of these fuses made by Littefuse is 38211000410.
The fuse is available from Digikey, Newark and Mouser.
Figure 15-1. Fuse Locations on the phase selector
58

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for OPTICOM 764

Table of Contents