Error Listing; Set Range - OPTICOM 764 Installation Manual

13.2.2 Error listing

Er displays a list of active errors, if any exist.
•
Press the SELECT button to display Er.
•
Press the TEST button to display any active errors in the system.
•
Press the SELECT button to display the next error code.
•
Continue to press the SELECT button until all active errors have been displayed.
o When the last error is displayed, pressing Select re-displays the first error code.
•
Pressing TEST exits to the main menu.
Error Code
--
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
Eb
EC
Ed

13.2.3 Set Range

Sr Resets the range setting timeout. This will allow the phase selector to respond to a range setting code
transmitted by a range setting IR emitter. After the time out period, the range code has no effect on
operation of the phase selector. This feature ensures that setting range via an emitter is available only to
authorized personnel who have access to the traffic cabinet.
Reset the Range Setting Timeout:
•
With no emitters present, press the SELECT button until Sr is displayed.
•
Hold the TEST button for 5 seconds.
•
Sr will flash when the reset has occurred.
Sr is also used to set range with a non-range setting emitter.
Set the range:
•
Place a powered IR emitter equipped vehicle at the point where you want detection to begin.
•
Press the SELECT button until Sr is displayed.
•
Hold the TEST switch until the Sr flashes and the corresponding call LED lights.
•
A new range value will be applied to all classes on this channel.
o This will set range only for the current profile/time plan.
o This function only applies to Infrared operation.
Intersection Equipment Installation Instructions
Definition
No Errors
Data Bus Error
Address Bus Error
Internal RAM Error
External RAM Error
External Flash Error
Data Flash/File System
RTC
Unknown Identity
Invalid Application
No Application
Switch hardware
Display Hardware
Watchdog Reset
Table 13-2 Error Code Listing
Error Code
EE 24V
EF Future use
EG GPS
Eh Radio Module
EI Future use
EJ Future use
Ek Future use
EL Future use
En Future use
Eo Future use
EP Future use
Eq Future use
Et Future use
EU Future use
56
Definition