Model 1045B Card Rack; Model 1045 In Ir Operation - OPTICOM 764 Installation Manual

6.1 Model 1045B Card Rack

•
The Model 1045B card rack may be used in GPS only operation.
•
The Model 1045B contains a universal power supply that provides 24 VDC to power the phase
selector. The 9-pin harness for the model 1045 card rack is identical to the 9-pin harness for the
model 760 card rack. See the previous section for installation details.
•
Model 1045B power input: 100-240 VAC 50-60 Hz
NOTE:
•
Model 1045A power input: 89-135 VAC, 57-63 Hz

6.1.1 Model 1045 in IR Operation

If you will be operating in IR only mode or simultaneous IR/GPS mode it is recommended that a model 760
card rack be used. There is no terminal strip on a model 1045 card rack for connecting IR detectors.
However IR detectors may be connected using an auxiliary interface panel. See the detector installation
manual for details.
Intersection Equipment Installation Instructions
27