Display And Switches - OPTICOM 764 Installation Manual

13.2 Display and Switches

Opticom Phase Selectors have a two digit display and two switches.
•
Select Switch
•
Test Initiate Switch
The Select switch is designed to act in conjunction with the Test switch to provide different operations and
tests. The operation/test to be performed is displayed in the 2 digit display. Each time the select switch is
pressed the next operation/test is displayed. The list will repeat after the last available operation/test is
displayed.
The display is normally off. While it is off, the test switch will have no function. If no buttons are pressed for
5 seconds, the display will shut off.
Start
Blank Display
Select
Returns to Blank Display after 5
seconds
Intersection Equipment Installation Instructions
Test Call
Select
Test Call
Select
Test Call
Select
Test Call
Select
Figure 13-1 Phase Selector Select Switch Functions
Error Review
Test Call
Select
Test Call
Set Range
Select
Detector Test
Test Call
Select
Test Call
Select
53
IP Override
Select
Select
Password Override
Select
Select
Erase logs
Reset to Defaults
Select
Standby Mode
Select