Static Colors Mode; Preset Colors Mode; User Colors Mode; Chases Mode - SHOWTEC ColorCue 1 Manual

ColorCue 1

2. Static Colors Mode

In this mode you can choose one of the 12 preset colors or 12 user recorded colors.

2.1. Preset Colors Mode

To select one of the 12 preset colors:
01) Press the FIXED COLORS button (13) to enter Preset Colors Mode. The LED on the button will light up.
02) Press one of the COLORS buttons (01) – (12) to select the desired preset color. There are 12 preset
colors: WARM WHITE, DAYLIGHT, YELLOW, GOLD, FIRE, PINK, PURPLE, NIGHT BLUE, SKY BLUE, CYAN,
GRASS, LIME. The LED on the button will light up.
03) Turn the STROBE control (H) to add strobe effect, if desired. The adjustment range is from OFF to FULL,
from low to high frequency.
04) Press the FIXED COLORS button (13) again to exit the Preset Colors Mode. The LED on the button will
turn off.
Preset colors DMX values
Button Preset color
1 WARM WHITE
2 DAYLIGHT
3 YELLOW
4 GOLD
5 FIRE
6 PINK
7 PURPLE
8 NIGHT BLUE
9 SKY BLUE
10 CYAN
11 GRASS
12 LIME

2.2. User Colors Mode

In this mode you can select a color which you have previously recorded. Please refer to Record a Color
on page 11 for more information.
01) Press the USER COLORS button (14) to enter User Colors Mode. The LED on the button will light up.
02) Press one of the COLORS buttons (01) – (12) to select the desired user color. The LED on the button
will light up.
Note: If no user color is assigned to a button, the LED will not light up when you press the button.
03) Turn the STROBE control (H) to add strobe effect, if desired. The adjustment range is from OFF to FULL,
from low to high frequency.
04) Press the USER COLORS button (14) again to exit the User Colors Mode. The LED on the button will
turn off.

3. Chases Mode

In this mode you can play one of the 12 preset chases or 12 user recorded chases.

3.1. Preset Chases Mode

To play one of the 12 preset chases:
01) Press the FIXED CHASES button (15) to enter Preset Chases Mode. The LED on the button will light up.
02) Press one of the CHASES buttons (01) – (12) to select the desired preset chase. The LED on the button
will light up.
03) Press the PLAYBACK button (18) repeatedly until the LED on the button lights up in the color
corresponding to the desired playback option. See Chase Playback on page 11 for more
information.
Order code: 50703
RED GREEN
245 225
255 230
255 230
255 115
200 50
255 0
220 0
25 0
0 127
0 255
50 255
195 255
9
BLUE WHITE AMBER
105 60
155 155
0 0
0 0
0 0
127 0
255 0
255 0
255 80
255 0
0 0
0 50
UV
235 0
0 0
135 0
255 0
50 0
0 255
0 255
0 255
0 255
0 200
127 0
140 0