Parking Mode - Mio MiVue 82 Series User Manual

Parking mode

✎
This feature is not available on all models.
Your dash cam supports the parking recording function. The Parking mode is
disabled by default. Before enabling the Parking mode, please check the memory
storage allocation of your device. Select
set a proper allocation for parking recording. Changing the allocation will erase the
memory card, so save any videos or photos to your computer first.
You can enable the function by selecting
Smart Mode or Passive Powered Parking Mode.
● Smart Mode: Supports recordings that are triggered by the G sensor and
motion detection. Smart parking mode is activated automatically after ignition
key is in off position or when the car stops moving for about 5 minutes,
depending on Auto Entry settings. For this mode, you must use an additional
power source such as Mio Smart Box uninterruptible power cable which is
sold separately.
● Passive Powered Parking Mode: Supports recordings after the G sensor
detections are triggered. When this Parking mode is enabled, the system
will enter the Parking mode automatically after the device is power off. This
Parking mode is powered by internal dash cam battery and it should last
up to 48 hours. It may be shorter depending on the amount of triggers and
temperature.
When the Parking mode detection is enabled, the system will enter the Parking
mode when the car stops moving for about 5 minutes. The screen will be turned
off. To turn on the screen:
10
> System > Storage Allocation to
> Parking Mode > Detection >