Table of Contents
Advertisement
Supervisor level
Process technology
Anti-crease
At the end of the programme, the
drum will continue to rotate at intervals
if the laundry is not removed immedi-
ately.
Changing this setting leads to increased
energy consumption.
The setting can be switched off or a
time between 1 and 12 hours can be
selected.
Factory default: Off
Drying levels
Changing this setting leads to increased
energy consumption.
You can alter the drying levels for the
Cottons, Minimum iron and Auto-
matic plus programmes.
It can be set to one of 7 different levels.
Factory default: normal
The Machine iron drying level in the
Cottons programme can be individu-
ally adapted.
You can change the residual moisture in
this programme to one of 11 levels from
16 % (more dry) to 26 % (more moist).
Factory default: 20 %
96
Further cooling
Before the end of the programme, the
temperature of the dried laundry is
monitored and the cooling phase at
the end of the programme is extended
if necessary.
Changing this setting leads to increased
energy consumption.
– Factory default: Off
– On
Cooling down temperature
The laundry will be cooled down auto-
matically before the end of the pro-
gramme. The automatic cooling-down
phase which takes place before the
end of a programme can be set at a
cooler level for all programmes. This
means that the cooling phase is exten-
ded.
Changing this setting leads to increased
energy consumption.
The setting can be changed from
40 °C–55 °C.
Factory default: 55 °C
Advertisement
Table of Contents
