Table of Contents
Advertisement
Changing the programme sequence
Payment systems
Opening the door or cancelling the
programme after it has started may
cause a loss of credit (depending on
how the tumble dryer was set up*).
* Either during the commissioning pro-
cess or subsequently, a Miele service
technician can reset the payment sys-
tem so that programming changes can
be made.
Changing a programme once it
has started
You cannot change to another pro-
gramme once a programme has started
(this prevents unintentional alterations).
You will need to cancel the current pro-
gramme before you can select a new
one.
Risk of fire due to incorrect use
and operation.
The laundry can burn and destroy
the tumble dryer and the surround-
ings.
See the section on "Warning and
safety" for further information.
Cancelling a programme
Touch the Start/Stop sensor control.
A message will appear in the display
asking if you wish to cancel the pro-
gramme.
Touch the
Yes
sensor control.
Reselecting a cancelled programme
Open and close the door.
Select and start a new programme.
46
Adding laundry
Open the door.
Risk of burns by touching hot
laundry in the drum.
You could burn yourself.
Let the laundry cool down and re-
move it carefully.
Add items.
Close the door.
Start the programme.
Interruption to the power sup-
ply
If the power supply is interrupted be-
cause the tumble dryer has been
switched off with the button :
Switch the tumble dryer on.
Touch the Start/Stop sensor control.
If the power supply is interrupted by a
power cut:
When power is restored, confirm with
.
OK
Touch the Start/Stop sensor control.
Time remaining
Altering the programme sequence can
cause adjustments in the h min time re-
maining display.
Advertisement
Table of Contents
