Table of Contents
Advertisement
Favourite programmes
After switching on, you can also select
a programme via: Favourites.
12 programmes can be stored as fa-
vourites based on your own priorities
and requirements.
These favourites will also be made
available in the control options
– Launderette ext. (12 prog)
– Launderette, basic (4 prog) (the first
four of the 12 favourites).
The control options can be defined un-
der Control.
Tip: You can assign a different colour to
each programme. In this case, the Prog.
colour allocation setting must be set to
On.
Changing favourite programmes
Select the programme you wish to
change or replace.
Confirm the programme or the setting
to be changed.
Another menu opens, enabling you to
select a new programme or change the
parameters.
Confirm using the Save sensor.
Your selection is now active.
Supervisor level
Special programmes
You can put together five special re-
sidual moisture or time-controlled pro-
grammes and assign your own pro-
gramme names.
First, enter the programme name.
Select the special programme you
want to change.
The
menu opens.
Save as
Use the letters and symbols below
the line to enter the name.
Touch the
Save
You can now enter the parameters for a
Res. moisture programme or
Timed drying.
The five special programmes are pre-
programmed at the factory. You can
change these special programmes.
The special programmes are added to
the programme packages. Enter the
name and settings of your special pro-
gramme into the "Special pro-
grammes" table in the "Programme
overview" chapter.
sensor.
93
Advertisement
Table of Contents
