Supervisor Level; Accessing Supervisor Level; Access Via Code; Change Code - Miele PDR 908 HP Marine Operating And Installation Instructions

Supervisor level

Accessing supervisor level



Programmes Favourites
Touching the  sensor takes you to
the Supervisor level.

Access via code

Supervisor level is accessed using a
code.
Factory default: The code is 000.

Change code

You can alter the Supervisor level ac-
cess code to protect the dryer from
unauthorised access.
Be careful when entering a new
code.
You will need to inform Miele Service
if you forget your new code. Miele
Service will have to reset the code.
Make a note of your new code and
store it in a safe place.
86
 
Supervisor
Help

Closing the settings menu

11:02
 Touch the  sensor.
The display will then go back to the pre-
vious menu level.
 Touch the  sensor.
The display will change to the main
menu.

Controls / Display

Language

The display can be set to appear in
one of several different languages. To
select the language you want, go to
the Languages sub-menu.
You can change the language as fol-
lows:
– Permanently using the supervisor
level (= "Supervisor language").
– For the duration of the current pro-
gramme only using the  sensor
control. The supervisor language is
displayed again at the end of the pro-
gramme.