Starting The Programme - Miele PDR 908 HP Marine Operating And Installation Instructions

Heat-pump dryer
Table of Contents

Advertisement

Payment systems
Tip: If your machine is connected to a
payment system, the amount of pay-
ment required will appear in the display.
Once the programme has started, do
not open the door or cancel the pro-
gramme.
Depending on the settings, money
may be lost in the payment system.

Starting the programme

The programme can be started as soon
as the Start/Stop sensor is flashing on
and off.
 Touch the Start/Stop sensor.
If a delay start period has been selec-
ted, this will appear in the display.
Once the delay start period has elapsed
(if applied), the programme duration will
appear in the display; otherwise, the
duration will appear straight away. The
programme sequence is also shown in
the display.
Tip: In the pull-down menu, you can
view the selected drying level or dura-
tion and the selected extras.
5. Starting the programme
Programme duration/Estim-
ated time remaining
The programme duration depends on
the quantity of laundry, the type of fab-
ric and the residual moisture in the
laundry or also the water hardness. The
running time for drying level pro-
grammes can therefore vary or "jump".
The tumble dryer's electronic control
system adapts to these factors and
then adjusts the displayed programme
duration with increasing accuracy.
33

Advertisement

Table of Contents
loading

Table of Contents