Timer - Miele PDR 908 HP Marine Operating And Installation Instructions

The Delay start must be activated in
the Supervisor level so that the timer
can be selected.
Before the programme starts, the
Timer can be used to select a pro-
gramme start time or programme end
time.
Setting the timer
 Touch the

 Timer

 Select the option
.
Start at
 Set the hours and the minutes with
the sensor.
OK
Changing the timer
The selected delay start time period can
be changed before the programme
start.
 Touch the ,  or  sensor.
 If required, change the specified time
and confirm with the
Deleting the timer
The selected delay start period can be
cancelled before the programme starts.
 Touch the ,  or  sensor.
The selected delay start period will ap-
pear in the display.
 Touch the
Delete
 Confirm with the
The selected delay start period is de-
leted.
Starting the timer
 Touch the Start/Stop sensor.
sensor.
Finish at , Start in
OK sensor.
sensor.
OK sensor.
The door will lock and the time until the
programme starts will appear in the dis-
play.
After the programme has started, the
selected delay start period can only be
changed by interrupting the pro-
gramme.
The programme can be started immedi-
ately at any time.
 Touch the
or
Start immediately sensor.
Timer
35