Table of Contents
Advertisement
Supervisor level
Clock display
After selecting the clock format, you
can set the time of day.
Clock format
– Factory default: 24-hour display
– 12-hour display
– No clock
Set
– The time of day can be set.
Date
The date can be set after selecting the
date format.
– Date format
The date can be shown starting with
the day, month or year.
– Date
The date is set.
88
Volume
The volume for various sounds can be
changed.
The volume can be changed.
– Finish tone
– Keypad tone
– Welcome tone
– Fault alarm
The audible signal that indicates an
error can be switched off. The
volume cannot be changed here.
Res. moisture display
In addition to displaying the drying
level, the residual moisture can also
be indicated as a percentage.
– Factory default: Without % value
– With % value
Visibility parameters
Various parameters are offered/dis-
played when a programme is selected.
You can decide which parameters
should not be displayed. These para-
meters can then not be edited during
programme selection.
– Residual moisture
– Duration (only timed programmes)
– Load size
– Gentle tumble
– Anti-crease
Advertisement
Table of Contents
