Recommended Maintenance - Graham Field Basic American MATRIX Series Instructions For Use Manual

Regular maintenance of the Long Term Bed is necessary to ensure continuing proper and safe operation. Read
and observe the following recommended maintenance schedule.
ITEM
Maintenance Inspection of All Components at Receipt of Shipment
Ensure all parts / components are included (see
"Unpacking The Bed").
Check all bed components for obvious damage.
Inspect the power cord for any cuts and / or damage.
Check to see all actuator / motor cables are routed
and connected properly to the control box.
Mechanical Inspection of Assemblies
Inspect all welds on the sleeping surface, frame, and
base assemblies for stress fractures.
Inspect all fasteners for wear and looseness.
IMPORTANT: Lubricate all pivot points, actuator /
motor clevis pins, and control arm clevis pins as
needed. White Lithium Grease is recommended.
Mechanical Inspection of Casters and Pedal Locking Mechanism
Check the pedal locking mechanism to ensure it
engages and disengages properly.
Check the casters and stationary foot pads on both
the head end and foot end for any damage, wear, or
debris. Replace if needed.
Check all rolling casters to ensure that they roll
properly and are unobstructed.
Electrical Inspection of Control Box, Hand Control Pendant, and Staff Control
Check the external power cord that plugs into the
control box for any chafing, cuts, or wear. Replace if
damaged.
Ensure all attaching hardware is securely tightened.
Check all electrical connections for wear or fractures.
Check the external backup battery (if you have one).
Replace if needed.
Check the hand control pendant cable for chafing,
cuts, or wear.
Check all hand control pendant functions - check to
ensure each button and associated function work
properly (i.e. head section rises when the HEAD UP
button is activated).
Electrical Inspection of Actuators / Motors
Check the actuator / motor cables for any chafing,
cuts, or wear.
Check the range of movement on all motors to ensure
they do not bind in the Full Up or Full Down positions.
GF Health Products, Inc. - www.grahamfield.com

RECOMMENDED MAINTENANCE

RECOMMENDED
INSPECTION PERIODS
Inspect Every Every
on Receipt 3 Months 6 Months
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Matrix Series Instructions for Use 999.0908-190C
MATRIX SERIES
MAINTENANCE
Performed Date
by
X
X
X
Comments
6