Listening To A Vinyl Record; Listening To A Cd - Victrola VTA-754B Manual

Hide thumbs

Table Of Contents

Table of Contents

1. Press the "PHONO" button, "PHONO" will appear

on the display.

2. Gently open the top cover.

Note: Be careful not to pinch your finger when

opening /closing the top cover.

3. Place a vinyl record on the turntable. When playing a

45 RPM record, use the included adaptor.

4. Select the appropriate speed (4).

5. Gently push tone arm clip (5)

to the right to release the tone arm.

6. Raise the cue lever (6) to lift the tone arm off the tone arm support.

7. Move the tone arm gently to the edge of the record (or the starting point of a track).

The turntable will begin to turn.

8. Gently lower the tone arm by slowly releasing the cue lever.

9. When the record reaches to its end, tone arm and rotation stop. Lift the tone arm and place

it to tone arm rest manually.

Important:

- Closing the top cover will help prevent dust from settling on the turntable.

- Always relock the tone arm clip before transporting the unit.

- Do not place anything on top of the turntable cover, especially while playing a record.

1. Press the CD/AUX button to switch to CD mode.

Note: When no disc is set, "NO DISC" will appear on the display.

2. Press the OPEN/CLOSE

Note: This button will only work in CD mode.

3. Place a disc on the tray with the printed label face up.

4. Press the OPEN/CLOSE button

Note: "READ" will blink for a few seconds.

5. The number of tracks will show on the display. And then it will begin playback from

the first track automatically.

6. To temporarily pause playback, press the PLAY/PAUSE button (

7. To skip tracks backward or forward, press the corresponding skip button (

Pressing

once will restart the current track.

Pressing

twice in succession will return to the beginning of the previous track.

8. To fast rewind / forward within a track, press and hold down the corresponding skip button (

) until the desired position is reached.

9. To stop playback, press the STOP

Important:

- Never place more than one disc on the tray.

- The disc must be placed in the center of the disc tray. An incorrectly loaded disc