Summary of Contents for Victrola THE EASTWOOD SIGNATURE
Page 1
T H E E A S T W O O D S I G N A T U R E MODEL: VTA-73 INSTRUCTION MANUAL PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE.
Page 2
CONTENTS FCC Statement and Other Information Warranty...
Page 8
Auto and Manual Stop Selection Switch: If this switch is turned ON, The record will start spinning when the tone arm moves over the record and the record will stop automatically when playback is finished. If this switch is OFF, the record will automatically begin to spin when the unit is in “VINYL”...
Page 9
“Eastwood Signature” VINYL STREAM™ - BLUETOOTH OUT OPERATION...
Page 10
How to Replace the Turntable Stylus (Replacement Stylus # ATN3600L) Removing the Stylus from the Cartridge 1. Place your fingers at the tip of the stylus and push down to the direction “A”. WARNING: When applying force to stylus, too much may damage or break the cartridge. 2.
Page 11
GENERAL Power Adapator ------------------ 9V/1.5A Power Consumption ------------- 13.5W Power Output --------------------- 2 x 5 W Size -------------------------------- 12.7’’ (322mm) W x 12.3 (312mm) D x 5.2” (131mm) H Weight ----------------------------- 4.5 lbs (2kg) Operating Temperature ---------- 5°C - + 40°C RECORD PLAYER Speeds ---------------------------- 33-1/3 RPM, 45RPM and 78 RPM BLUETOOTH...
FCC STATEMENTS Caution: the user is cautioned that charges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s).
Except as limited below, if the product proves defective in either material or workmanship within one (1) year from the date of purchase, Victrola will replace the product at no charge. If the product model is no longer available and cannot be replaced with an identical model, Victrola will issue a merchandise credit for the purchase price to be redeemed at victrola.com.
Page 15
Victrola’s responsibility for malfunctions and defects in hardware is limited to replacement or repair as set forth in this warranty statement.