Component Identification - Graco 24W482 Instructions Manual

Component Identification

Keypad, Display, and Icons
NOTICE
To prevent damage to soft key buttons, do not press
the buttons with sharp objects such as pens, plastic
cards, or fingernails.
F
F . 1
IG
Pump ON LEDs (A)
• Time Control LED: In RUN MODE illuminates
indicating function mode that is currently run-
ning.
Pump OFF LED (B)
• In RUN MODE this LED illuminates when in the
OFF or RESET portion of the RUN CYCLE.
Display (C)
• A blinking field on the display indicates the con-
troller is in SETUP MODE.
• In RUN MODE numbers on the display will not
blink.
334662B
A
B
C
D
E
RIGHT Direction Arrow / TEST / ENTER (D)
• In SETUP MODE, saves entry, moves cursor in
display one field to the right or to the next setup
step.
• In RUN MODE activates the pump for one com-
plete ON cycle if actuated during the OFF por-
tion of the RUN cycle.
UP and DOWN Direction Arrows (E)
• Press and hold both the UP and DOWN Arrow
keys together for 3 seconds to enter SETUP
MODE.
• In SETUP MODE increase or decrease number
values associated with operation.
LEFT Direction Arrow / TEST / RESET (F)
• In SETUP MODE moves cursor in display one
field to the left.
• In RUN MODE, Pressing RESET starts a PUMP
OFF cycle.
• Press and hold left and right direction arrow
together for 3 seconds to enter TEST MODE.
Component Identification
3