Westfalia 84 38 60 Original Instruction Manual page 8

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
 Please read this manual carefully and use the unit only according to this
manual.
 Dispose of used packaging material carefully or store it out of the reach of
children. There is a danger of suffocation!
 The unit is not a toy and does not belong in the hands of children. Never
leave the unit unsupervised when in use. Keep it out of reach of children or
persons in need of supervision. Children should be supervised to ensure
that they do not play with the unit.
 Make sure the voltage corresponds to the type label on the unit.
 Wear personal protective equipment. Always wear safety goggles
to protect your eyes when using the metal cutting saw. Regular
glasses cannot stand for safety goggles. Wear ear protection
when working for long periods of time with the machine.
 Do not use a damaged cut-off disc. Check the disc before each
use. Make sure the cut-off disc is suitable for this machine.
 The permitted speed of the cut-off disc must be at least equal to
the maximum no load speed of the machine. Cut-off discs which
rotate faster than permitted may be destroyed.
 Diameter and thickness of the cut-off disc must conform to the require-
ments of the machine. Discs of the wrong size cannot be shielded or
controlled.
 Use only cut-off discs which conform to the technical data in this manual
and on the discs.
 Never touch the cut-off disc when cutting is in progress.
 Do not overload the metal cutting saw by using unsuitable cut-off disc for
heavy jobs. Only use impeccable cut-off discs. Replace any blunt resp.
worn cut-off discs on time.
 The cut-off disc will rotate for some time after the engine has been turned
off. Never try to stop the disc by hand.
 Wear suitable clothing when using the machine. Synthetic materials may
be damaged by flying sparks. Tight clothing will not get caught in moving
parts easily.
Safety Notes
4