Mounting The Cut-Off Disc - Westfalia 84 38 60 Original Instruction Manual

Mounting the Cut-off Disc

Before undertaking any assembling or set-up work on the metal cutting saw,
pull the power plug!
1. Mount resp. dismount the cut-off disc as shown on the drawing below.
2. First loosen the hex bolt (c). Lift up the safety hood (a) up to the end until
you have free access to the flange (e).
Operation
a Safety Hood
b Rotating Direction Arrow
c Hex Bolt
d Cut-off Disc/Circular Saw Blade
a
e Flange
f Flange Wrench
b
g Open End Wrench
c
d
18
e f
g