Installing The Lon Communication Module (Accessories) - Viessmann Vitotronic 11 CC1E Installation And Service Instructions Manual

Installing the LON communication module (accessories)

Fig. 1
Inserting the coding card
Only use the boiler coding card supplied with the
boiler.
X7
Fig. 2
Note
Coding card to boiler assignment: See
www.vitotronic.info
Adjusting the high limit safety cut-out (if required)
The high limit safety cut-out is supplied with a factory
setting of 110 °C.
Parameters to be configured during initial start-up: See
chapter "Connecting the control unit to the LON".
Installation sequence
15