Replacing The Adf Reverse Roller - Raven Scanner Pro User Manual
Hide thumbs
Also See for Scanner Pro:
- Installation & reference manual (32 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Replacing the ADF Reverse Roller
After scanning approximately 100,000 pages through the ADF, the ADF Reverse Roller
may be worn out and you may experience problems with document feeding. In this
case, you may need to replace a new ADF reverse roller. For ordering the ADF roller,
please email Raven support at support@raven.com or call 1-800-713-9009 to order a
replacement.
Disassembling Procedure
1. Press the ADF Release button.
2. Gently open the ADF Front Door to the left.
3. Hold the Reverse Roller Cover with your fingers as shown and place it down.
4. Press the right end of the Friction Roller externally to detach it from the slot and
then detach the left end from its hole.
25
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Scanner Pro and is the answer not in the manual?