Setting Up Your Scanner
Install the Scanner
1.1 Hold the ADF Paper Tray and insert
two pins to the holes on the top of the
scanner as shown.
Connect to Power
2.1 (Optional) Connect one end of your
cable
Ethernet LAN cable to an available port of
product.
your Ethernet Hub, connect the other end to
port marked
at the back of the product.
1.2 Pull out the extension to the length
of the document. Pull the Output Tray
and raise the paper stopper to prevent
the paper from falling.
2.2 Connect one end of the power
to the power receptacle of the
Connect the other end to an
appropriate power outlet.
11