Replacing The Adf Reverse Roller - Raven Original 2nd Generation User Manual

Replacing the ADF Reverse Roller

After scanning approximately 100,000 pages through the ADF, the ADF Reverse Roller
may be worn out and you may experience problems with document feeding. In this case,
you may need to replace a new ADF reverse roller. For ordering the ADF roller, please
email Raven support at support@raven.com or call 1-800-713-9009 to order a
replacement.
Disassembling Procedure
1. Pull the ADF Release lever.
2. Locate the pull tab to the right and pull toward you.
3. With the cover tray open, locate the blue lever on the roller. Push up to unlock the
roller.
4. Locate the white wheel to the right, and gently pull the roller at an angle towards
you to remove.
Reassembling Procedure
1. Insert the left end of the Reverse Roller to the hole of its original place.
2. Insert the right end of the Reverse Roller to its slot.
3. Push the blue lever down to lock into place.
4. Close the Reverse Roller Cover.
5. Close the ADF Front Cover.
29
support@raven.com | 1-800-713-9009 | raven.com/support